Structure of Lysozyme from COC IMISX setup collected by still serial crystallography on crystals prelocated by 2D X-ray phase-contrast imaging
Serial Crystallography (SX)
Starting Model(s)
| Initial Refinement Model(s) |
|---|
| Type | Source | Accession Code | Details |
|---|
|
experimental model | PDB | 5D5F | |
Crystallization
| Crystalization Experiments |
|---|
| ID | Method | pH | Temperature | Details |
|---|
| 1 | LIPIDIC CUBIC PHASE | 4.5 | 293 | 0.5-1 M NaBr, 50-100 mM CH3COONa, pH 4.5, and 15-30 %(v/v) PEG400 |
| Crystal Properties |
|---|
| Matthews coefficient | Solvent content |
|---|
| 2.12 | 41.9 |
Crystal Data
| Unit Cell |
|---|
| Length ( Å ) | Angle ( ˚ ) |
|---|
| a = 79.17 | α = 90 |
| b = 79.17 | β = 90 |
| c = 38.24 | γ = 90 |
| Symmetry |
|---|
| Space Group | P 43 21 2 |
|---|
Diffraction
| Diffraction Experiment |
|---|
| ID # | Crystal ID | Scattering Type | Data Collection Temperature | Detector | Detector Type | Details | Collection Date | Monochromator | Protocol |
|---|
| 1 | 1 | x-ray | 100 | PIXEL | DECTRIS EIGER X 16M | | 2018-08-17 | M | SINGLE WAVELENGTH |
| Radiation Source |
|---|
| ID # | Source | Type | Wavelength List | Synchrotron Site | Beamline |
|---|
| 1 | SYNCHROTRON | SLS BEAMLINE X06SA | 1 | SLS | X06SA |
Serial Crystallography
| Sample delivery method |
|---|
| Diffraction ID | Description | Sample Delivery Method |
|---|
| 1 | | fixed target |
| Fixed Target |
|---|
| Diffraction ID | Description | Sample Holding | Support Base | Motion control | Details | Sample Solvent |
|---|
| 1 | IMISX | IMISX | 3D-printed holders in standard goniometer base | | | |
Data Collection
| Overall |
|---|
| ID # | Resolution (High) | Resolution (Low) | Percent Possible (Observed) | Rrim I (All) | CC (Half) | Net I Over Average Sigma (I) | Redundancy | Number Reflections (All) | Number Reflections (Observed) | Observed Criterion Sigma (F) | Observed Criterion Sigma (I) | B (Isotropic) From Wilson Plot |
|---|
| 1 | 1.85 | 55.98 | 100 | 0.24 | 0.7 | 3.59 | 31.1 | | 10598 | | | 32.53 |
| Highest Resolution Shell |
|---|
| ID # | Resolution (High) | Resolution (Low) | Percent Possible (All) | Percent Possible (Observed) | Rrim I (All) | CC (Half) | Mean I Over Sigma (Observed) | Redundancy | Number Unique Reflections (All) |
|---|
| 1 | 1.85 | 1.89 | | | 0.95 | 0.34 | 1.32 | 16.7 | |
Refinement
| Statistics |
|---|
| Diffraction ID | Structure Solution Method | Cross Validation method | Starting model | Resolution (High) | Resolution (Low) | Cut-off Sigma (F) | Number Reflections (Observed) | Number Reflections (R-Free) | Percent Reflections (Observed) | R-Factor (Observed) | R-Work (Depositor) | R-Work (DCC) | R-Free (Depositor) | R-Free (DCC) | Mean Isotropic B |
|---|
| X-RAY DIFFRACTION | MOLECULAR REPLACEMENT | THROUGHOUT | 5D5F | 1.86 | 55.98 | 1.34 | 10598 | 530 | 99.38 | 0.2208 | 0.2196 | 0.22 | 0.2421 | 0.24 | 33.5786 |
| Temperature Factor Modeling |
|---|
| Anisotropic B[1][1] | Anisotropic B[1][2] | Anisotropic B[1][3] | Anisotropic B[2][2] | Anisotropic B[2][3] | Anisotropic B[3][3] |
|---|
| | | | | |
| Non-Hydrogen Atoms Used in Refinement |
|---|
| Non-Hydrogen Atoms | Number |
|---|
| Protein Atoms | 1000 |
| Nucleic Acid Atoms | |
| Solvent Atoms | 53 |
| Heterogen Atoms | 19 |
Software
| Software |
|---|
| Software Name | Purpose |
|---|
| PHENIX | refinement |
| CrystFEL | data scaling |
| PDB_EXTRACT | data extraction |
| CrystFEL | data reduction |
| PHENIX | phasing |